New Pattern Homogeneous Vinyl PVC Roll Floor Waterproof Vinyl Flooring Sheet

• Customization: Available
• After-sales Service: Online Technical Support, Onsite Training, Return
• Warranty: More Than 10 Years
• Model NO.: Homogeneous Flooring
• Material: PVC
• Style: Homogeneous
• Function: Anti-Slip, Moisture Proof, Wear-Resistant, Fireproof, Waterproof
• Thickness: 2.0mm
• Lead Hardness: Soft
• Surface Treatment: Simple Color
• Pattern: Chip Plain
• Color: Multi-Color
• State: Roll
• Usage: Commercial
• Type of Flooring: Homogeneous Flooring
• Abrasion Resistant: T Grade Flooring
• Product Name: Hospital PVC Floor
• Use: Indoor Floor
• Transport Package: Neutral Packing
• Specification: 2mm*2m*20m
• Trademark: KCCFLOR
• Origin: China
• HS Code: 3918109000
• Production Capacity: 300000square Meter/Month
• Package Size: 50.00cm * 50.00cm * 210.00cm
• Package Gross Weight: 150.000kg

Product Description

 

Company Profile

Product Description

 

Homogeneous PVC vinyl flooring is produced in several stages. First, the raw materials including limestone, polyvinyl chloride, plasticizers, stabilizers and pigments are thoroughly mixed. After mixing, the material is consolidated and formed into sheets. The sheets are then cooled and formed into rolls. Finally, it is packaged.

With advantages of high durability, low maintenance, scratch resistance, antibacterial and fungicidal treatment, it is a perfect choice for high-traffic areas such as hospitals, airports, stations, shopping malls, offices, schools, workshops, gyms, etc.




Anti Bacterial Hospital PVC UV Resistant Waterproof Homogeneous PVC Vinyl Flooring Roll

Description	Standard	Unit	Result
Overall thickness	ISO 24346(EN 428)	mm	2.0
Sheet Width	ISO 24341	m	20
Sheet Length	ISO 24341	m	20
Classification
Product specification	-	-	ISO 10581
European classification	ISO 10874	class	34-43
Fire rating	EN 13501-1	class	Bf1-s1
	EN 13501-1	-	B1(B-s1, t0)
Toxic testing	EN 14372:2004	-	PASS
Static electrical propensity	EN1815	KV	<2
Electrical resistance	EN1081	Ω	>10^9
Slip resistance dry	EN13893	-	≥0.3
Slip resistance wet	DIN EN 16165	class	R9
Performances
Type binder content	ISO 10581	type	Two
Dimensional stability	ISO 23999(EN 434)	%	≤0.4
Castor chair test	ISO 4918(EN 425)	-	OK
Thermal conductivity	ISO 10456 (EN 12524)	W/(m.k)	0.25
Color fastness	ISO 105- B02	degree	≥6
Chemical products resistance	ISO 26987(EN423)	-	OK
Anti-bacterial activity	ISO 22196	-	≥99%
Special maintenance treatment	-	-	PUR
TVOC after 28 days	ISO16000-6	µg/m3	<10

 

Classic Projects





Product Details




PVC Flooring Installation Process & Technical Requirements

1.  Floor Inspection
a.  Use   a   hygrothermograph   to    measure   temperature   and    humidity.   The   indoor temperature and surface temperature should ideally be around  15°C, and construction should not proceed if temperatures are below 5°C or above 30°C. The recommended relative air humidity for construction is between 20% and 75%.
b.  Use  a  moisture  meter  to  test the  moisture  content  of the substrate. The  moisture content of the substrate should be less than 4%.
c. The strength of the substrate should meet the requirements of concrete strength grade C20 or higher. Use a hardness tester to ensure the surface hardness of the substrate is no less than 1.2 MPa.
d. The flatness of the substrate should have a height deviation of less than 5 mm over a 2-meter  straightedge.  If  PVC  flooring  is  to  be  installed  directly  without  self-leveling compound, the height deviation of the substrate should be less than 2 mm.
e. Use a small steel hammer to tap the substrate surface and check for hollow spots; visually inspect the substrate surface for cracks.


2. Floor Pre-Treatment
a.  Use a floor grinder with a power rating of at least 1800W, equipped with appropriate     grinding discs, to perform a full-surface grind. Remove residues such as paint, adhesives, as well as raised and loose sections.
b. Clean the floor thoroughly using an industrial vacuum cleaner with a power rating of no less than 2000W.
c.  For cracks in the floor, repair them using stainless steel reinforcement mesh and
polyurethane adhesive, followed by a quartz sand overlay. Hollow areas must be chipped away and repaired properly.




3. Self-Leveling Construction-Priming
a.Absorptive substrates such as concrete or cement screed should first be sealed and primed using a multi-purpose primer.

 

b.Non-absorptive substrates such as ceramic tiles, terrazzo, or marble must be primed with a dense (non-absorptive) primer.
c.If the substrate moisture content is too high (>4%) but immediate construction is
necessary, an epoxy-based primer may be used, provided the substrate moisture content does not exceed 8%.
d.The primer should be applied evenly without noticeable pooling. Once the primer has dried, the next step of self-leveling construction can proceed.


4. Self-Leveling Construction-Mixing
a. Measure the required amount of clean water according to the water-to-powder ratio specified on the self-leveling compound packaging. Gradually pour the self-leveling     powder into the mixing bucket while stirring continuously.
b. To ensure thorough mixing, use a high-power, low-speed electric drill equipped with a specialized mixing paddle.
c. Mix until a uniform slurry with no lumps is achieved. Let the mixture stand for approximately 2 minutes for maturation, then briefly stir again.
Note: The water content must strictly adhere to the specified water-to-powder ratio (refer to the corresponding self-leveling product instructions). Insufficient water will affect
flowability, while excessive water will reduce post-curing strength.




5. Self-Leveling Construction-Application
a. Pour the mixed self-leveling compound onto the prepared floor and spread it evenly     using a specialized self-leveling smoothing trowel (notched scraper) with the appropriate notch size.
b.Workers should then wear spiked shoes and gently roll a self-leveling bubble-release roller over the surface to remove trapped air, preventing pinholes and uneven joints.

 

c. After application, seal off the construction area immediately. Avoid foot traffic for the first
d hours and heavy impacts for 10 hours. PVC flooring installation can proceed after 24 hours.
e. In winter conditions, allow at least 48 hours of curing before installing flooring.
f. If fine grinding and polishing are required, perform them no earlier than 24 hours after self-leveling application.


6. Floor Installation - Pre-laying and Cutting
a. Both rolls and tiles should be acclimatized on-site for at least 24 hours to allow material memory recovery and temperature stabilization with the construction environment.
b. Use a specialized edge trimmer to cleanly cut and finish the rough edges of sheet flooring.
c.For tile installation, ensure tight seams with no gaps between adjacent pieces.
d.When installing sheet flooring, overlap seams by 3cm for proper overlap cutting. Maintain a single continuous cut through both layers.


7. Floor Installation - Adhesive Application
a.Select PVC flooring adhesive and appropriate trowel size based on product specifications.
b.For sheet installation: Roll back one end of the material, clean both subfloor and backing surface, then apply adhesive to the subfloor.
c.For tile installation: Fold tiles back from center to edges, clean surfaces, then apply adhesive.
d. Follow specific adhesive manufacturer's instructions as application requirements may vary.


8. Floor Installation - Debubbling and Rolling
a.After placement, use a soft-faced block to smooth surfaces and expel trapped air.
b.Roll entire area with 50-75kg steel roller, paying special attention to seam edges.

 

c.Remove excess adhesive immediately.
d.Allow 24-hour curing before proceeding with seam grooving and welding.


9. Floor Installation - Grooving
a.Groove only after full adhesive cure. Using professional grooving tools, cut seams to 2/3 material depth without penetrating backing layer.
b. Hand grooving tools should be used for terminal areas with matching depth/width specifications.
c.Thoroughly vacuum groove channels before welding.


10. Floor Installation - Welding
a. Perform with manual or automatic welding equipment.
b.Set welder temperature (typically 350°C) according to welding rod specifications.
c.Feed molten rod into grooves at consistent speed.
d.Partially trim excess rod during semi-cooled state using crescent knives.
e.Final trimming should occur after complete cooling.


11.  Floor Maintenance
a.PVC flooring is designed for interior use only.
b.Implement regular cleaning using manufacturer-recommended solutions.
c.Prohibit high-concentration solvents (toluene, acetone) and strong acids/alkalis. Avoid abrasive tools or sharp implements that may damage surfaces.


12. Required Tools
a. Floor Preparation:
Surface moisture meter  Surface hardness tester Floor grinding machine

High-power industrial vacuum cleaner Lambswool roller
Self-leveling mixer
30L self-leveling mixing bucket Self-leveling notched trowel
Spiked shoes
Self-leveling bubble-release roller


b. Floor Installation:
Floor edge trimmer Utility knife
2-meter steel straightedge Adhesive trowel
Steel roller (50-75kg) Seam groover
Welding gun
Crescent knife
Welding rod trimmer
Combination marking gauge

This manual is compiled based on our extensive accumulated experience and numerous tests. However, the
actual performance of products may vary depending on specific application conditions and usage methods. The success of application also depends on the user's technical judgment and proper implementation according to appropriate industry standards - factors beyond our control.
The final interpretation right of this technical specification belongs to KOLB INDUSTRY LTD.

OUR COOPERATIVE CUSTOMERS

FAQ

1.How do you guarantee the quality of your PVC vinyl flooring?
Each step is strictly controlled by the QC team to make sure all our products turn out great. Our products have a limitted warranty as long as 7~15 years.

2.How about the delivery time?
Lead time since receipt of 30% T/T deposit payment: 30 days. (Samples will be prepared within 5 days.)

3.Do you offer other products besides PVC vinyl flooring?
Yes. Besides PVC vinyl flooring we also provide as sports flooring, rubber flooring, LVT flooring, SPC flooring, WPC flooring, MgO flooring and WCC flooring,T-molding, skirting, primer, self-leveling cement, floor adhesive, floor press roller, electric drill stirrer, multi-purpose floor brushing machine, hot air welding gun, welding wire and other interior decoration material.

4.Do you charge for the samples?
According to our company policy, we provide free samples, but the freight charges need customers pay.

5.Can you produce according to customers' design?
Sure, we are professional manufacturer, OEM AND ODM are both welcome.